ORDER OF MIXING

Direct to Reservoir:

Notes:

  • We recommend using the entire product at once to ensure optimal homogeneity and correct ingredient ratios.
  • Wear protective gloves, dust mask and safety glasses when transferring the powder.

Add WSP products directly to the reservoir under vigorous mixing using lukewarm water (~35 °C).

Follow the correct order of addition to ensure complete dissolution.

1

CHECK WATER QUALITY

It is recommended to measure the pH and EC of the water before adding anything.

2

ADD WSP-A

Add the required amount directly to the reservoir while maintaining vigorous water movement.

3

WAIT UNTIL FULLY DISSOLVED

Do not add other products before full dissolution.

4

ADD WSP-B

Add the required amount directly to the reservoir while maintaining vigorous water movement.

5

WAIT UNTIL FULLY DISSOLVED

Do not add other products before full dissolution.

6

ADD WSP-C (IF REQUIRED)

Add the required amount directly to the reservoir while maintaining vigorous water movement.

7

WAIT UNTIL FULLY DISSOLVED

Allow WSP-C to dissolve completely.

8

ADJUST THE pH IF NECESSARY

EXAMPLE DOSAGE

Direct to Reservoir:

Vegetative nutrient solution EC 2,0 mS/cm

10L WATER

ADD 7.2 g WSP-A

MIX THOROUGHLY

ADD 7.2 g WSP-B

MIX THOROUGHLY

ADJUST pH

READY

  • Dose 7,2 g of WSP-A to 10 litres of reverse osmosis or demineralised water.
  • Mix vigorously then dose 7,2 g of WSP-B to the solution.
  • Mix vigorously,
  • Adjust the pH if necessary.
  • The solution is now ready.

Generative nutrient solution EC 3,0 mS/cm

10L WATER

ADD 8.9 g WSP-A

MIX THOROUGHLY

ADD 8.3 g WSP-B

MIX THOROUGHLY

Add 7.7 g WSP-C

MIX THOROUGHLY

ADJUST pH

READY

  • Dose 8,9 g of WSP-A to 10 litres of reverse osmosis or demineralised water.
  • Mix vigorously then dose 8,3 g of WSP-B to the solution.
  • Mix vigorously then dose 7,7 g of WSP-C to the solution.
  • Mix vigorously
  • Adjust the pH if necessary.
  • The solution is now ready.

Timing

WSP-A & B are intended as an ingredient in horticultural fertigation of hydroponic nutrient solutions. Therefore, WSP-A & B should be used at any time a nutrient solution would be dosed. WSP-C is intended as flowering fertilizer in horticultural fertigation of hydroponic nutrient solutions in combination with WSP-A and WSP-B. Therefore, WSP-C can be used during generative phases of plant growth at any time a nutrient solution would be dosed.

Frequency

Frequency of use should be adapted to the crop type, environmental factors, phenological stage and water application rate (Litre of solution per cubic meter of irrigation flow). Check our website or scan the QR code for grow guides with more detailed and elaborate information. For irrigation frequency and volume, please follow the recommendation for the substrate and the respective irrigation system.
Online information is great but never specific to your situation. Always consult with your Agricultural Advisor for your specific fertiliser situation.

Storage

Store in original packaging protected from direct sunlight in a dry, cool and well-ventilated area. Partly used or damaged containers should be closed well. Store between -10 °C and 45 °C (14 °F and 113 °F).

USAGE ESTIMATION

MINIMUM AMOUNT OF FEED WATER

Calculated based on an average EC of 2.8
Actual feed water may vary depending on EC level and growing conditions.

1kg

=    10L stock solution

≈    1.000L feed water

5kg

=    50L stock solution

≈    5.000L feed water

10kg

=    100L stock solution

≈    10.000L feed water

20kg

=    200L stock solution

≈    20.000L feed water

Facebook-f Instagram Youtube Tiktok

Now available

Rokzbastic

Finishing Bloom Additve

Silicbastic

Direct plant available Silicon Additive

Learn more